Pipe Bollards

Hardy fabricates steel pipe bollards that protect building corners, overhead doors, gas meters, electrical gear and mechanical equipment from vehicle and forklift impact. Bollards are cut to length from steel pipe, capped, and built either with base plates for surface mounting or plain for setting in concrete. Built in our shop to the project drawings, they arrive on site at the right height and ready to set.

Crash Rail Backing

In hospitals, schools and corridors full of carts and beds, wall-mounted crash rails need solid backing to stand up to repeated impact. Hardy fabricates steel backing plates and channel sized to the stud layout and the rail’s mounting points. It goes in with the framing, before drywall, so the rail anchors into steel instead of gypsum.

Equipment Platforms

Elevated platforms give HVAC and plumbing equipment a level, solid place to sit and give service techs a safe place to work. Hardy fabricates steel equipment platforms for rooftops, mezzanines and mechanical rooms, built to the structural drawings and sized to the equipment they carry. Because we install the equipment too, we lay out platforms with piping, ductwork and service clearances in mind.

In-Wall Backing

Wall-hung fixtures, grab bars, cabinets and equipment need something solid behind the drywall. Hardy fabricates steel in-wall backing from plate, angle and channel, cut and drilled to fit between studs. Each piece is made for the height and location the drawings call for, so it goes into the right wall before the wall is closed up.

Structural Bracing

Pipe, duct and suspended equipment need bracing that holds them in place under load, thermal movement and, where required, seismic forces. Hardy fabricates steel bracing, hangers, trapezes and support frames to the engineered details. Shop-built supports go up faster in the field and match what the design calls for.

Concrete Embeds

Embed plates and anchors set before the pour give equipment, supports and steel a solid connection to the structure. Hardy fabricates steel embeds to the structural details, with plates cut, drilled and fitted with studs or anchors as specified. We deliver them ahead of the concrete schedule, because an embed missed before the pour means drilling and epoxy later.

Railing

Hardy fabricates steel handrail and guardrail for equipment platforms, mezzanines, stairs, roof edges and mechanical areas. Railing is built to the dimensions and details on the drawings, with posts, rails and toe plates as required. It ships ready to bolt or weld in place.

Burglar Bars

Condensing units, rooftop equipment and wall openings are easy targets for copper theft and break-ins. Hardy fabricates steel security bars and equipment cages for condensers, louvers, duct openings and other access points. Each one is sized to keep airflow moving and leave room for service.

Equipment Stands

Pumps, water heaters, tanks, condensers and air handlers often need to sit above the floor or roof for drainage, clearance or service access. Hardy fabricates steel equipment stands sized to each unit’s footprint and weight, with mounting holes where the equipment needs them. Stands arrive ready to set, so equipment can go in as soon as it lands on site.

AHU Coil Package

Hardy shop-builds the piping packages that connect air handler coils to the building’s chilled and hot water systems, including valves, strainers, unions and gauges. Assembling the package in our shop means cleaner joints, less field labor and a faster tie-in once the unit is set. Each package is built to the coil’s connection sizes and the project’s control and valve schedule.

Successful projects, satisfied clients.